- 1 INR
- Wet Film Thickness Gauge
- 50 to 800m on one side, 2 to 32mils on the other.
When applying a liquid coating, by measuring the uncured film thickness, it is possible to determine the eventual dry film thickness. Applying too much coating wastes time and materials. It can also affect the performance and finish of the product. Too much wet film can cause the coating to crack as it cures; too little coating increases the risk that the substrate will not be sufficiently protected, leading to rust spots.
Plastic Wet Film Combs are made from ABS plastic and are designed to be used once and kept as a record of wet film thickness measurement for quality assurance or customer requirements.
When applying a powder coating, by measuring the uncured film thickness, it is possible to predict the eventual dry film thickness.
Powder coating is an efficient system producing a high quality finish with minimal waste where excess or over-sprayed powder may be recycled and reused.
Metric and Imperial values are on the same comb, 50 to 800 micron on one side, 2 to 32 mils on the other.
Each comb has 16 measurement steps
- Plastic Wet Film Comb
- All India